Trim (*.trm) Open/Save


Save OBJ files as Trim files. (ver. MD 7.5)
Trim files can be previewed in the Library and can be glued to the Garment..



Main Menu ▶ File ▶ Save As ▶ Trim


Main Menu ▶ File ▶ Open ▶ Trim




  1. Load an OBJ file as Trim.

  2. Follow the indicated guideline below :

    Main Menu ▶ File ▶ Save As ▶ Trim

    → When there are multiple OBJs in the 3D window, tje Save Trim window appears allowing you to choose the desired OBJ.
    → The Save File window appears.

  3. Locate the saving path and file name. Then, click the Save button.
    → The OBJ file is saved Trim file.

  1. Follow the indicated guideline below :

    Main Menu ▶ File ▶ Open ▶ Trim

    → The Open File window appears.

  2. Select the file to be opened and click Open.
    → The Open Trim window appears.

  3. Use the drop-down menu next to Position option to locate the Trim.
    → Original: trim is loaded at its original position when it was saved as a Trim file.
    → Reset: trim is loaded at the center of the 3D window.


※ Note:

  • Hover the mouse over the Trim file in the Library window to preview trim. 

  • Click and drag or double lick the Trim file to open from the Library window.


  • No labels