Visualize the change in fit by temporarily clipping two points of the garment

Add and modify tacks in the 2D Pattern window with the Tack tools. (Ver. MD6.5)


  • 3D Garment Window Toolbar → Tack Tool



  1. Select the tool according to the Location above.
  2. Click on the starting clipping point on draped garment.
    → Starting point will be created accompanied by a connecting line.
  3. Click on the end clipping point.
    → End point and the connecting line will be created.
    → Same Tack will also be created in the 2D Pattern Window.
  4. Click on Simulate icon.
    → The garment will be draped and the two points created will stick together closely.
  • No labels