Similar to ironing, use this tool to smooth out edges of garments with two layers sewn together.



  • Main Menu → 3D Garment → Press 

  • 3D Garment Toolbar → (Press) Tool 



  1. Select the Press tool from the Main Menu or 3D Garment toolbar

  2. Click on one of the pattern layers in the 3D Garment.  
    → The selected pattern becomes transparent.
  3. Click on the second layer that is connected to the first layer.  
    → The first selected pattern becomes opaque.
         All Sewing Lines on the selected Pattern switched to Turned Sewing Line Type (ver MD7.5).
  4. Activate Simulation.
  • No labels