Bond

Objective

Create bonded qualities by adding partial physical properties to designated areas of a pattern. 

Create bonded qualities to Pattern Unit. (ver MD6.5)

 

Location

  • Property Editor (Internal Shapes / Pattern Only) → Bond/Skive → Bond     

 

Operation

  1. Select an Internal Shape to apply a partial physical property to find and click the menu indicated in Location.
     
  2. Click the Bond checkbox to turn it on. 
    → The selected Internal Shape will temporarily become a semi-transparent orange color in the 2D Pattern Window. 
    → By default, the same physical property used for the overall pattern will be applied to the area of the selected Internal Shape - in other words, the same physical property is applied twice for the Internal Shape. 
      
  3. Simulate. 
    → The area of the Internal Shape will appear a bit stiffer, as if a fusible has been applied. 

  4. The physical property Preset of the Internal Shape can be changed under Property Editor → Bond → Detail.
     
Icon
In addition to the physical property Presets, you can adjust individual properties in the Details section of the Bond function.
  • No labels